nextzett
nextzett SF3 Premium Protect
nextzett SF3 Premium Protect
Couldn't load pickup availability
- Polymer sealant wax for all paint finishes
- Enhances the gloss of the paint finish
- Protects up to 6 months from UV, road grime, bird droppings, road salt and ocean airborne salt
- Stands against harsh carwash chemicals
- Easy and fast application
- Silicone-free
A high-gloss sealant wax based on natural and synthetic waxes that protects up to six months. The polymer cross-linked care components create a natural gloss and protective film on all types of paint finishes. A brilliant, streak-free deep gloss finish is produced on all paint finishes through the use of special care components and the fine-tuned selection of high-quality gloss components. Protects against UV rays, sap, bird droppings, road grime, ocean airborne salt and road salt. Leaves an incredibly smooth finish. Unlike other polymer based sealant waxes, Premium Protect is very easy to apply. Premium Protect is silicone-free.
Areas of application: Premium Protect is suitable for all passenger vehicle, commercial vehicle and marine coatings as well as other coating types.
Application:
- Prior to application, surface should be washed, dried and out of direct sunlight
-
Applying in small sections at a time, apply a thin layer of SF3 sealant by hand or with a polishing machine and finishing pad on low speed
-
Allow product to dry and cure for about 15 minutes and then buff off with a clean microfiber cloth towel. The longer you let it set, the stronger the protection. However, do not allow to set too long or it could become difficult to remove. If that happens, just apply fresh product over the previous application and buff off.
-
Apply another layer for additional protection if desired
I was a fan of the wax in the blue can and found SF3 to be even better.I use it by hand like a polish meaning I do small sections at a time and then wipe it off then do another little section overlapping the other section then wipe it off.It is actually a quick way to wax a car.The results have been outstanding and entirely issue free.If you see any water spots just rub a little wax on it and wipe off.Spots Gone.There is also no issue with getting wax on any trim leaves no white residue will only enhance it.This should be Step 4 in the wax system and be available in the same size bottle.Very easy to use wax with great results.
Hard to remove/buff off. Need to provide instructions on how long to leave on car after application.
Thanks for taking the time to review Premium Protect. Based on your feedback we will update our label directions in the future. For now, we've update our application instructions here on the product page. After applying Premium Protect on the paint finish, we recommend buffing off with a microfiber cloth after 3 minutes of set time and no more than 5 minutes. Otherwise, the polymers will become difficult to buff off. If that happens, simply apply a little more Premium Protect to the area and it should wipe off easily. Please contact us with any questions.
Hard to remove/buff off. Need to provide instructions on how long to leave on car after application.
Thanks for taking the time to review Premium Protect. Based on your feedback we will update our label directions in the future. For now, we've update our application instructions here on the product page. After applying Premium Protect on the paint finish, we recommend buffing off with a microfiber cloth after 3 minutes of set time and no more than 5 minutes. Otherwise, the polymers will become difficult to buff off. If that happens, simply apply a little more Premium Protect to the area and it should wipe off easily. Please contact us with any questions.
That reflection of the sun/shine/sparkle on the hood above the grill...that is legit, that was an actual effect that I was able to see and capture with the camera! Once finished the shine was like glass. Really good stuff!
I worked in small sections and let it sit on the surface for no longer than 3 1/2 minutes. It came off without too much of an issue and didn't leave too much of a grippy finish. Once finished the shine was like glass. I give the Premium Protect 5 out of 5 stars.
Share
I was a fan of the wax in the blue can and found SF3 to be even better.I use it by hand like a polish meaning I do small sections at a time and then wipe it off then do another little section overlapping the other section then wipe it off.It is actually a quick way to wax a car.The results have been outstanding and entirely issue free.If you see any water spots just rub a little wax on it and wipe off.Spots Gone.There is also no issue with getting wax on any trim leaves no white residue will only enhance it.This should be Step 4 in the wax system and be available in the same size bottle.Very easy to use wax with great results.
Hard to remove/buff off. Need to provide instructions on how long to leave on car after application.
Thanks for taking the time to review Premium Protect. Based on your feedback we will update our label directions in the future. For now, we've update our application instructions here on the product page. After applying Premium Protect on the paint finish, we recommend buffing off with a microfiber cloth after 3 minutes of set time and no more than 5 minutes. Otherwise, the polymers will become difficult to buff off. If that happens, simply apply a little more Premium Protect to the area and it should wipe off easily. Please contact us with any questions.
Hard to remove/buff off. Need to provide instructions on how long to leave on car after application.
Thanks for taking the time to review Premium Protect. Based on your feedback we will update our label directions in the future. For now, we've update our application instructions here on the product page. After applying Premium Protect on the paint finish, we recommend buffing off with a microfiber cloth after 3 minutes of set time and no more than 5 minutes. Otherwise, the polymers will become difficult to buff off. If that happens, simply apply a little more Premium Protect to the area and it should wipe off easily. Please contact us with any questions.
That reflection of the sun/shine/sparkle on the hood above the grill...that is legit, that was an actual effect that I was able to see and capture with the camera! Once finished the shine was like glass. Really good stuff!
I worked in small sections and let it sit on the surface for no longer than 3 1/2 minutes. It came off without too much of an issue and didn't leave too much of a grippy finish. Once finished the shine was like glass. I give the Premium Protect 5 out of 5 stars.